8
Preparation
Wall mounting
Note:
LMake sure the screws are securely
fastened to the wall.
LUse the following wall template to position
the screws before drilling.
Setting the time and date
Important:
LConfirm that the AC adaptor is connected.
LEnsure that w is not flashing.
1Press {j}.
2Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3Press {*}.
4Enter the current hour and minute by
selecting 2 digits for each (24-hour time
entry).
Example:15:1 5
Press {1}{5} {1}{5}.
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
5Press {>}.
L“SETTING BS” will be displayed.
6Press {>}, then press {*} 2 times.
7Enter the current day, month and year by
selecting 2 digits for each.
Example:17 May, 2004
Press {1}{7} {0}{5} {0}{4}.
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
8Press {>}.
L“SETTING BS” will be displayed.
9Press {ih}.
Note:
LIf a power failure occurs, set the time and
date again.
8 cm
Screws
Hook
Hooks
8 cm
TCD430NZ(E).book Page 8 Tuesday, February 3, 2004 2:02 PM