19
Cordless Telephone

Caller ID

Caller ID Service

Caller ID is a service of your telephone company and will only operate if you have
subscribed to this service.
After subscribing to Caller ID, this phone will display the caller information.
If your unit is connected to a PBX or a telephone line that does not support this service,
you will not be able to use it.
Caller ID does not display caller information while using the handset for an intercom call.
However, the caller information will be stored to the Caller ID List.
For all local and national incoming calls, your display will show the area code (e.g. 09 for
Auckland) or the cellular prefix (e.g. 0274 for Telecom Cellular) followed by the caller’s
telephone number. An Auckland caller’s number will be displayed as 09XXXXXXX. The
seven X’s represent the seven digits of the caller’s telephone number. A call from a six
digit Telecom Cellular number will be displayed as 0274XXXXXX. For incoming
international calls, your display may only show the digits “0000”. For business users on
a Centrex line, your display will show the Centrex extension numbers in the shorter
extension number format used within your company.
Standby Mode Display

Using Telecom’s or Another Company’s Toll

Services

Your telephone company may charge you for a local call if the number dialled has the
area code prefix included. If the charge for local call is unacceptable, only the 7-digits of
the local number should be dialled from your telephone. Do not dial the “0” prefix or the
area code digit.
When new calls have been received, the display shows the
number of calls.
In the example on the left, 10 new calls have been received.
17.8 14:59
H/set 1
10 Calls
500NZ_e.book Page 19 Monday, July 7, 2003 4:19 PM