Panasonic KX-TCD505E Call Options, Call Bar On/Off, Setting the Direct Call Number

Handset Settings

Call Options

To exit the operation, press at any time.

1	Press JOYSTICK	2 Select “		Setting	3 Select “Call
	(or move).	Handset	”.		Option”.

Go to step 4.

Call Bar On/Off

When this feature is set to ON, outgoing calls cannot be made. Intercom calls and calls to numbers assigned as emergency numbers can be made (see Setting the Emergency Calls on page 58).

Follow steps 1 to 3 shown above, then:

4 Select “Call Bar”.	5 PIN.Enter 4-digit Handset	6 Select “On” or “Off”.
	(Factory Preset
	0000)

•While the call prohibition mode is turned on, “” is displayed.

Setting the Direct Call Number

After a direct call number has been set and the feature has been turned on, you can dial

the direct call number only by pressing or . Incoming calls are able to be accepted.

Follow steps 1 to 3 shown above, then:

4	Select “Direct Call	5	Enter Direct Call	6	Press JOYSTICK.
	No.”.		Number.
			(max. 24 digits)
7	Select “Save”.	8	Select “On”.

•While the direct call mode is turned on, “ ” is displayed.

50