Panasonic KX-TCD705NL operating instructions Base Programming, Bell Selection

30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 43

Base Programming ➡

You can program the base unit according to your needs.

While programming:

•When programming is completed, a confirmation tone sounds and display returns to the function menu.

•You can exit the programming mode any time by pressing P.

◆◆ To change the Initial Settings

Standby Mode

		1	2	3
Base 1
10 New	Calls	 Y or V 	S/ U	 Y or V ‘Input Command’
A12.05	13:58
			Select
Î Ï  Ô Í Á Ò

‘Setting Base’

◆Bell Selection

There are three choices for Bell Selection when a call is being received:-

•all handsets ring.

•the selected handset(s) ring(s).

•the selected handset rings first. Then if it does not answer, all other handsets will

ring.

The factory preset is ‘All handsets’. To change the bell selection, program as follows:

• Select ‘All Handsets’ to ring.

Follow	 A 	Enter	 A 
steps 1 to		Base PIN		Y or V
3 above		(4-digits)
• Select ‘Selected Handset(s)’ to ring.
Follow		Enter	 B 		A-F 
steps 1 to	 A  Base PIN
						Y or V
3 above		(4-digits)	The current
					Select
			selected handset(s)		handset(s) to
			flash(es).		ring.

• Select ‘Selected’ then ‘All Handsets’ to ring.

stepsFollow A BaseEnter		 C 	A-F			A-F
				 Yor V 			 Y or V
1 to 3	PIN	The current	Select			Select
above	(4-digits) selected		handset(s)			number of
		handset(s)	to ring.		rings.
		flash(es).

Chapter 4

43