➡Base Programming
46
You can program a 4-digit password for the base unit. The factory preset is 0000.
Changing the password may prevent the unauthorised use of your unit by another
person.
◆Set Base Unit PIN
Follow
steps 1
to 3 on
page 43
Enter current
Base PIN
(4-digits)
E Enter new Base PIN (4-digits) TWICE
If 2nd entry of NEW PIN is incorrect, an error
tone sounds.
If 2nd entry is correct, a confirmation tone
sounds and display returns to function menu.
NOTE: Once you have programmed the password, you cannot confirm it. We
recommend you write down the password. If you forget it, please consult your nearest
Panasonic Service Centre.
You can restrict desired handset(s) from dialling selected phone numbers. Phone
numbers beginning with the restricted digits cannot be dialled out.
For example, if “00” is assigned as the call restriction number, international calls cannot
be made.
For selected handset(s) you can assign up to 6 call restriction numbers (up to
8 digits). Set the call restricted handset(s) and the restriction number(s) by
programming. The factory pre-set is OFF.
◆Call Restriction
Follow
steps 1
to 3 on
page 43
Enter current
Base PIN
(4-digits)
All registered
handset
numbers are
displayed.
F
Select
handsets 1 to
6 to select
handset to
restrict.
A to F Yor V Enter call
restriction
number (max.
8 digits).
6 call
restriction
numbers can
be entered.
Yor V
To cancel the Call
Restricted Handset(s)
Follow steps 1 to 3, then
enter the handset number(s)
you want to cancel. When
finished,ZY,then
ZPto return to the
standby mode.
When you dial a restricted
number,the call is
disconnected and the dialled
number flashes.
Eg. The restricted number is
“00”.
To cancel the Call
Restricted Number(s)
Follow steps 1 to 4, then
select the call restriction
number you want to cancel
by pressing Y. Then
ZW. When finished,
ZY,thenZPto
return to the standby mode.

1 2 3 4 5 6 7

ABCDEFGHIabcdefg
00
ÎÏÔÍÁ Ò
30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 46