➡
◆◆Storing Names and Numbers in the Phonebook
Make sure that the unit is in the standby mode.
1. ZYor V.
2. Select ‘New Phonebook’.
3. ZYor V.
• The display shows the number of remaining phonebook items,
then ‘<Enter Name>’.
4. Enter a name (up to 16 characters) with the dialling buttons,T
or V.
See steps for entering names and symbols (page 21).
5. Name confirmed ZU.
6. Enter phone number (up to 24 digits).
7. Number confirmed,ZY.
8. ZUor Sto select Private Category number (1-9) or OFF.
9. ZYor V.
10. Select ‘Save’.
11. ZYor V.
• Abeep sounds and ‘Saved’is displayed.
• The display shows the number of remaining phonebook items,
then ‘<Enter Name>’. You can continue storing other items.
• To return to the standby mode, ZP.
• If a pause is required for dialling,ZX. If a pause is inserted
while entering a phone number, the pause counts as one digit.
• If the display shows ‘Memory Full’in step 3, the display will
return to the standby mode. To store, clear other stored items in
the phonebook (pages 23-24).
• You can exit the programming mode at any time by pressing P.
19
Base 1
A2 New Calls
A03.08 21:06
ÎÏÔÍÁ Ò
New Phonebook
ASetting H/set
ASetting Base
ÎÏÔÍÁ Ò
Enter
New Phonebook
200-Memory Avail
ÎÏÔÍÁÒ
<Enter Name>
ASetting H/set
ASetting Base
ÎÏÔÍÁÒ
JAMES
<Enter Phone No>
ASetting Base
ÎÏÔÍÁÒ
JAMES
<Enter Phone No>
ASetting Base
ÎÏÔÍÁÒ
JAMES
01234567
ASetting Base
ÎÏÔÍÁÒ
JAMES
01234567
****Saved****
ÎÏÔÍÁÒ
Private Category
OFF
ACategory 1
ÎÏÔÍÁÒ
Save
AGo Back
ASetting Base
ÎÏÔÍÁÒ
30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 19