![](/images/new-backgrounds/1310394/31039465x1.webp)
Base Unit Settings
Call options
Changing the flash time
Change the flash time, if necessary, depending on the requirements of your service provider or PBX.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
35).
4Select “Call Options”, then press
{>}.
5Select “Recall”, then press {>}.
6Select the desired setting, then press
{>}.
7Press {ih}.
Setting pause length
Change the pause length, if necessary, depending on the requirements of your service provider or PBX.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
35).
4Select “Call Options”, then press
{>}.
5Select “Pause Length”, then press
{>}.
6Select the desired setting, then press
{>}.
7Press {ih}.
Storing/changing emergency numbers
These settings determine which phone numbers can be dialled while the call bar feature is on (page 29).
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
35).
4Select “Call Options”, then press
{>}.
5Select “Emergency No.”, then press
{>}.
6Select a memory location, then press
{>}.
L If the memory location already contains an emergency number, the number is displayed.
7Enter/edit the number, then press
{j/OK}.
L To erase an emergency number, press and hold {C/T}.
8Press {ih}.
Selecting area codes to be deleted automatically
In some situations, phone numbers stored automatically in the Caller ID list (page 37) will include area codes. If you do not want to dial the area codes when making calls from the Caller ID list, you can store the area codes which you want the unit to delete automatically.
Example: You have stored the area code “123”. If you make a call from the Caller ID list to the phone number
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
33