| Useful Information |
|
|
Problem | Cause & solution |
I cannot register a handset to a | L The maximum number of base units (4) are already |
base unit. | registered to the handset. Cancel unused base unit |
| registrations from the handset (page 48). |
| L The maximum number of handsets (6) are already |
| registered to the base unit. Cancel unused handset |
| registrations from the base unit (page 47). |
| L You entered the wrong PIN number. If you forget |
| your PIN, consult your nearest Panasonic service |
| centre. |
| L Locate the handset and the base unit away from |
| other electrical appliances. |
|
|
|
|
Answering system | |
|
|
Problem | Cause & solution |
The other party complains that they | L The recording time is set to “Greeting Only”. |
cannot leave a message. | Select “1 Minute” or “3 Minutes” (page 45). |
| L Message memory is full. Erase unnecessary |
| messages (page 41). |
I cannot operate the answering | L Another handset or the base unit user is using the |
system. | answering system, accessing the caller list or |
| changing base unit settings. Wait for the other user |
| to finish. |
| L A caller is leaving a message. Wait for the caller to |
| finish. |
| L The handset is too far from the base unit. Move |
| closer. |
I cannot operate the answering | L You are entering the wrong remote access code. |
system remotely. | Confirm that the correct remote code is entered. If |
| you forget the remote access code, store a new |
| remote access code again (page 43). |
| L You are pressing the dial keys too quickly. Press |
| each key firmly. |
| L The answering system is turned off. Turn it on (page |
| 44). |
| L You are using a pulse telephone. Try again using a |
| touch tone phone. |
While recording a greeting | L A call is being received. Answer the call and try |
message or listening to messages, | again later. |
the unit rings and recording stops. |
|
57
