Base Unit Settings
Other options
Changing the base unit PIN (Personal Identification Number)
For security, the base unit PIN must be entered when changing certain settings. The default PIN is “0000”.
Important:
L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it.
4Select “Other Options”, then press
{>}.
5Select “Base Unit PIN”, then press
{>}.
6Enter the new
7Press {ih}.
Resetting the base unit to its default settings
1Press {j/OK}.
2Select “Base Unit Setup”, then press {>}.
3Enter “0000” (default base unit PIN). L If you changed the PIN, enter it (page
35).
4Select “Other Options”, then press
{>}.
5Select “Reset Base”, then press {>}.
6Select “Yes”, then press {>}.
7Press {ih}.
Note:
L The following items will be deleted or reset to their default settings:
–Settings listed on page 31, 44
–Base unit ringtone
–Base unit ringer volume (Medium)
–Caller list
L The following items will be retained:
–Date and time
–Shared phonebook entries
–Repeater mode
–Recordings, including your greeting message, caller messages, voice memos, audible call announcements, and recorded conversations (KX- TG1233 only)
35
