Panasonic KXTG4745B, KX-TG4745 Special programming, Alarm, Silent mode, Changing the handset name

Programming

Special programming

Alarm

An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset.

Important:

RSet the date and time beforehand (page 15).

1MMENUN#720

2MbN: Select the desired alarm option. a

MSELECTN

Off	Turns alarm off. Go to step 7.
Once	An alarm sounds once at the
	set time.
Daily	An alarm sounds daily at the
	set time. Go to step 4.

3Enter the desired month and date. a

MOKN

4Set the desired time.

5MAM/PMN: Select “AM” or “PM”. a MOKN

6MbN: Select the desired alarm tone. a

MSELECTN

R We recommend selecting a different ringer tone from the one used for outside calls.

7MSELECTN a MOFFN

R When the alarm is set, is displayed.

Note:

RTo stop the alarm, press MOFFN or place the handset on the base unit or charger.

RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.

Silent mode

Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed,

for example, while sleeping. Silent mode can be set for each handset.

Important:

RSet the date and time beforehand (page 15).

RWe recommend turning the base unit ringer off (page 18) in addition to turning the silent mode on.

RIf you have set the alarm, the alarm sounds even if the silent mode is turned on.

Turning silent mode on/off

1MMENUN#238

2MbN: Select the desired setting. a

MSAVEN

R If you select “Off”, press MOFFN to exit.

3Enter the desired hour and minute you wish to start this feature.

4MAM/PMN: Select “AM” or “PM”. a MOKN

5Enter the desired hour and minute you wish to end this feature.

6MAM/PMN: Select “AM” or “PM”.

7MSAVEN a MOFFN

R When the silent mode is set, is displayed.

Changing the start and end time

1MMENUN#237

2Continue from step 3, “Turning silent mode on/off”, page 29.

Changing the handset name

Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is “No”. If you select “Yes” without entering any handset name,

“Handset 1” to “Handset 6” is displayed.

1MMENUN#104

For assistance, please visit http://www.panasonic.com/help 29