Stanton SCS.3M user manual Master/Monitor Mode Button

Master/Monitor Mode Button

3.2.7Master/Monitor Mode Button

FX

EQ

EQ FX

When the Master Button is engaged, the Channel Faders and Crossfader temporarily become controls for monitor volume, master volume, and monitor mix. The VU meters also display the master levels for checking a clean output signal from your computer.

To enter “Master” mode, press and hold the Master button. The SCS.3m will remain in Master mode as long as you hold your finger on the Master button. (Figure 3.14)

MASTER

Figure 3.14

3.2.8Crossfader

FX EQ EQ FX

MASTER

The extended length Crossfader gives extra fine control of blending between channels and more surface to perform multi-touch effects with two fingers for quickly cutting in and out of channels. (Figure 3.15)

Let’s say you wanted to emulate the sound of a crab scratch or flares using the SCS.3m crossfader. While there is not a back stop to bounce against, we can take advantage of multi-touch here and get something very similar. Try holding your index finger at the furthest end of the crossfader, and then drumming your other fingers (middle to pinky) on the surface next to it. (Figure 3.16)

Figure 3.15

MASTER

HOLD TAP TAP TAP

Figure 3.16

13