Stanton SCS.3M user manual Slider Section

Slider Section

3.2.2Slider Section

FX

EQ

EQ FX

MASTER

The slider section features 4 virtual sliders, which can be toggled to control EQ or FX (or any other MIDI assignable control). (Figure 3.8)

The value of each slider is shown on the LEDs next to it. If you switch the Slider Section to a different mode (for instance, from EQ to FX mode), the SCS.3m will remember your settings and restore them when you switch back.

Figure 3.8

The sliders on the SCS.3m are touch sensitive “virtual faders.” Moving your finger across one is like moving a fader, or turning a knob. Sounds pretty simple, and it is. However, there is another aspect to the sliders that is not obvious, and that is their “multi-touch” capability.

Note: Throughout the manual we will use the HOLD	and the TAP icon	to help you
icon understand the multi-touch feature.

To do a multi-touch, press and hold one point on a slider, and then tap a different location. (Figure 3.9).

FX

TAP

HOLD

MASTER

Figure 3.9

Using multi-touch on different sliders can produce some very interesting results. The faders can also be used as relative controls, allowing for very fine control of parameters with a total range greater than the length of the slider.

10