Battery charge, Battery strength | Panasonic KX-TG2421NZ instruction

Preparation

Battery charge

Place the handset on the base unit for 6 hours before initial use.

LThe unit will beep once, the CHARGE indicator will light, and “Charging” will be displayed.

L“Charge completed” is displayed when the battery has been fully charged. The CHARGE indicator will remain lit.

CHARGE indicator

Note:

LTo ensure the battery charges properly, clean the charge contacts of the handset and base unit with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust, or high humidity.

Battery strength

You can confirm the battery strength on the handset display.

Battery icon	Battery strength

5Fully charged

6Medium

7Low

When flashing: needs to be recharged.

8Discharged

Recharging the battery

Recharge the battery when:

–“Recharge battery” is displayed or 7 flashes on the handset display.

–the handset beeps intermittently while it is in use.

Note:

LRecharge the handset battery for more than 15 minutes, or the display will continue showing the indication.

LIf the battery has been discharged, the handset will display “Charge for 6h” and 8 when you place the handset on the base unit.

11

Image 11

Panasonic KX-TG2421NZ operating instructions Battery charge, Battery icon Battery strength, Recharging the battery

Contents

Model No. KX-TG2421NZ Charge the battery for 6 hours before initial use Introduction Introduction Included accessories No. Accessory items Accessory information Installation Important safety instructions General Warnings BatteryMedical Environment For best performanceImportant notice Base unit location/noise Routine care Connections If you subscribe to an Adsl service Battery installation Recharging the battery Battery chargeBattery strength Battery icon Battery strength Operation Operating time Battery replacementBattery performance Controls Controls and display Microphone Charge contacts Using the navigator key Ringer indicator Receiver Display Display KRecall CallL To adjust the speaker volumeMaking calls To dial after confirming the entered number Temporary ringer off To make a call using the redial listAnswering calls Auto talk Voice enhancer Useful features during a callHold button Mute button =Phonebook G2=Booster on Pause button for PBX/long distance service usersFor Call Waiting service users Recall button Handset Handset locatorBase unit Adding items to the phonebook Using the phonebook =Name search dB=Scroll list Calling someone in the phonebook During an outside call, press Menu Chain dial featureEditing items in the phonebook Erasing items in the phonebook Caller ID features Using Caller ID serviceUsing toll services from Telecom or another company Example Jack Smith 310P 29JUN 0555333444 310P 29JUN Caller listViewing the caller list and calling back Missed Calls Rcvd Phone Kcalls Book L Erasing a selected item Editing a caller’s phone number before calling backStoring caller information into the phonebook Erasing caller information Main menu Sub-menu Guide to handset programming Handset ringer tone Ringer settingsHandset ringer volume Ringer volume Low High KBack dB SaveL Handset LCD contrast Call optionsDisplay options Auto talk Storing your area code Telephone settingsLine mode Recall time Re-registering the handset Other optionsDial lock Handset key tone Base unit Feature Feature code Setting code Programming via direct commandsDirect commands chart To connect an optional headset to the handset Belt clipHeadset optional To attach the belt clip To remove the belt clip Wall mounting Fasten the AC adaptor cord Hooks To power outlet Display message Cause & solution Error messages General use TroubleshootingProgrammable settings Problem Cause & solution Phonebook Making/answering calls, Paging Caller ID Power failure Battery charge Handset Technical informationBase unit Index Page Manufacturer