Panasonic KX-TG2421NZ Programming via direct commands, Direct commands chart

Programmable Settings

Programming via direct commands

You can also programme most features using “direct commands”—special codes that take you directly to the feature you wish to programme and allow you to select the desired setting. There is no need to scroll through the unit’s menus.

Details of each feature can be found on the corresponding pages.

1

2

3

4

5

Press {MENU}.

Enter the desired feature code (shown below).

Enter the desired setting code (shown below).

LThis step may vary depending on the feature being programmed.

Press {Save}.

Press {OFF} to exit programming mode.

Direct commands chart

Feature	Feature code	Setting code	Page
Ringer volume	{1} {1}	{1}: Low {2}: Medium	page 28
		{3}: High {0}: Off
Ringer tone	{1} {2}	{1}–{3}: Tone pattern 1–3	page 28
		{4}–{7}: Melody pattern 1–4
Voice enhancer	{5}	{1}: On {0}: Off	page 29
Dial lock	{6}	Go to step 3 on page 31.	page 31
LCD contrast	{0} {1}	{1}–{6}: Level 1–6	page 29
Key tone	{0} {2}	{1}: On {0}: Off	page 31
Auto talk	{0} {3}	{1}: On {0}: Off	page 29
Set area code	{0} {4}	Go to step 4 on page 30	page 30
Set dial mode	{0} {5} {1}	–	page 38
Set recall time	{0} {5} {2}	{1}: 700 ms {2}: 600 ms	page 30
		{3}: 400 ms {4}: 300 ms
		{5}: 250 ms {6}: 110 ms
		{7}: 100 ms {8}: 90 ms
Set line mode	{0} {5} {3}	{1}: A {2}: B	page 30
Handset registration	{0} {0}	Go to step 4 on page 32.	page 31

Note:

LIf you make a mistake or enter the wrong code, press {OFF} then start again by pressing {MENU}.

33