Using Vehicle Battery Power | Radio Shack Race Scanner specification

Using Vehicle Battery Power

To power the scanner from your vehicle's cigarette-lighter socket, you need a DC adapter, such as Cat. No. 270-1560.

Cautions:

•The DC adapter must be capable of delivering 9 volts and at least 300 milliamps, its center tip must be set to negative, and its barrel plug must correctly fit the scanner's POWER jack. The recom- mended adapter meets these specifications. Using an adapter that does not meet these specifications could damage the scanner or the adapter.

•To protect your vehicle's electrical system, always plug the adapter into the scanner before you plug it into your vehicle's cigarette- lighter socket. Always unplug the adapter from the vehicle's ciga- rette-lighter socket before you unplug it from the scanner.

•If batteries are installed, make sure ALKALINE JACK NI-CDis set to the correct position (see “Using Internal Batteries” on Page 8).

1.Turn VOLUME counterclockwise until it clicks to make sure power is turned off.

2.Set the DC adapter’s voltage switch to 9V.

3.Connect the adapter’s 3.4 mm outer diameter/1.3 mm inner diam- eter tip to the adapter’s cord, matching TIP to –.

4.Plug the adapter’s barrel plug into your scanner’s POWER jack.

5.Plug the other end of the adapter into your vehicle’s cigarette- lighter socket.

12

Image 12

Radio Shack Race Scanner owner manual Using Vehicle Battery Power

Contents

PRO-74 100-Channel VHF/UHF/Air/800 MHz Race Scanner Features Page Frequency Range Step Transmission MHz KHz FCC Notice Scanning Legally Contents Special Features TroubleshootingCare and Maintenance Specifications General Guide to Scanning Power Sources Using Internal BatteriesPreparation Page Charging Nickel-Cadmium Batteries Using Standard AC Power Using Vehicle Battery Power Connecting AN Antenna Connecting an Optional Antenna Connecting AN Extension Speaker Connecting AN Earphone Headphones Traffic Safety Attaching the Belt ClipListening Safely Understanding Your Scanner Look AT the KeypadPage Look AT the Display Page Service Banks Understanding BanksMemory Banks Name Typical Usage Frequency Range MHz HAM Turning on the Scanner Setting Squelch Operation Storing Known Frequencies Into Channels Press E to store the frequency into the channel Searching the Service Banks Finding and Storing Active Frequencies Searching from a Selected Frequency Search Skip Memory Storing Active Frequencies Manually Selecting a Channel Scanning Channels Deleting a Frequency from a Channel Listening to Weather Broadcasts Using the PRO-74 AT the Races Storing a CAR Number and Frequency Adding Frequencies to a Car Number Scanning by CAR Number Viewing Frequencies Associated with a Car NumberDeleting a Frequency from a Car Number Finding What CAR Numbers are in What Channels Special Features Turning Memory Banks on and OFFLocking OUT Channels Priority N K Using the Keylock Using the Display BacklightChanging Search Speeds Normal Search Hypersearch Turning the Battery Save Function OFF/ON Turning the KEY Tone OFF/ON Skipping Data Signals General Guide to Scanning Guide to FrequenciesNational Weather Frequencies Canadian Weather Frequencies Birdie Frequencies Guide to the Action Bands Typical Band UsageVHF Band UHF Band Band Allocation Primary UsageAbbreviations Very High Frequency VHF Meter Amateur Band- 50-54 MHz Ultra High Frequency UHF Frequency Conversion Conventional Systems Band Locally Assigned Troubleshooting Problem Possible Cause Remedy Resetting the Scanner BATT.Lo Care and Maintenance Specifications Limited One-Year Warranty RadioShack Division of Tandy Corporation Fort Worth, Texas