Connecting AN Antenna | Radio Shack Race Scanner specs

When you finish using the DC adapter, disconnect it from the cigarette- lighter socket, then disconnect it from your scanner.

Note: If the scanner does not operate properly when you connect a DC adapter, unplug the adapter from the cigarette-lighter socket and clean the socket to remove ashes and other debris.

CONNECTING AN ANTENNA

The supplied stub antenna helps your scanner receive most strong transmissions at events and makes the scanner easier to carry and use. The supplied flexible antenna provides slightly better reception and helps your scanner receive strong local signals. You can attach ei- ther of the supplied antennas or an optional antenna to the scanner (see “Connecting an Optional Antenna” on Page 14).

Follow these steps to attach either of the supplied antennas to the con- nector on the top of your scanner.

1.Align the slots around the antenna’s connector with the tabs on the scanner’s BNC connector.

2.Slide the antenna’s connector down over the scanner’s connector and rotate the antenna connector’s outer ring clockwise until it locks into place.

13

Image 13

Radio Shack Race Scanner owner manual Connecting AN Antenna

Contents

PRO-74 100-Channel VHF/UHF/Air/800 MHz Race Scanner Features Page Frequency Range Step Transmission MHz KHz Scanning Legally FCC Notice Contents Troubleshooting Special FeaturesCare and Maintenance Specifications General Guide to Scanning Using Internal Batteries Power SourcesPreparation Page Charging Nickel-Cadmium Batteries Using Standard AC Power Using Vehicle Battery Power Connecting AN Antenna Connecting an Optional Antenna Connecting AN Earphone Headphones Connecting AN Extension Speaker Attaching the Belt Clip Traffic SafetyListening Safely Look AT the Keypad Understanding Your ScannerPage Look AT the Display Page Understanding Banks Service BanksMemory Banks Name Typical Usage Frequency Range MHz HAM Operation Turning on the Scanner Setting Squelch Press E to store the frequency into the channel Storing Known Frequencies Into Channels Finding and Storing Active Frequencies Searching the Service Banks Searching from a Selected Frequency Storing Active Frequencies Search Skip Memory Manually Selecting a Channel Deleting a Frequency from a Channel Scanning Channels Listening to Weather Broadcasts Storing a CAR Number and Frequency Using the PRO-74 AT the Races Adding Frequencies to a Car Number Viewing Frequencies Associated with a Car Number Scanning by CAR NumberDeleting a Frequency from a Car Number Finding What CAR Numbers are in What Channels Turning Memory Banks on and OFF Special FeaturesLocking OUT Channels Priority N K Using the Display Backlight Using the KeylockChanging Search Speeds Normal Search Hypersearch Turning the KEY Tone OFF/ON Turning the Battery Save Function OFF/ON Skipping Data Signals Guide to Frequencies General Guide to ScanningNational Weather Frequencies Canadian Weather Frequencies Birdie Frequencies Typical Band Usage Guide to the Action BandsVHF Band UHF Band Primary Usage Band AllocationAbbreviations Very High Frequency VHF Meter Amateur Band- 50-54 MHz Ultra High Frequency UHF Conventional Systems Band Locally Assigned Frequency Conversion Problem Possible Cause Remedy Troubleshooting BATT.Lo Resetting the Scanner Care and Maintenance Specifications RadioShack Division of Tandy Corporation Fort Worth, Texas Limited One-Year Warranty