Radio Shack Race Scanner owner manual Resetting the Scanner, BATT.Lo

Models: Race Scanner

1 52
Download 52 pages 54.1 Kb
Page 49
Image 49

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

 

 

 

BATT.Lo

The batteries are

Recharge rechargeable

appears.

weak.

batteries, or replace non-

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

rechargeable batteries.

 

 

 

Poor or no recep-

Batteries are weak

Check the batteries, or

tion.

or dead.

make sure the scanner

 

 

is plugged into a working

 

 

AC or DC outlet.

 

 

 

Error appears.

Frequency entered

Re-enter the frequency

 

incorrectly.

correctly, including the

 

 

decimal point.

 

 

 

While scanning, the

Stored frequencies

Avoid storing frequen-

scanner locks on

are the same as

cies listed under “Birdie

frequencies that

“birdie” frequencies.

Frequencies” on

have an unclear

 

Page 41, or only listen to

transmission.

 

them manually.

 

 

 

RESETTING THE SCANNER

If the scanner’s display locks up or does not work properly after you connect power, you might need to reset the scanner.

Caution: This procedure clears all the information you have stored into the scanner (such as frequencies and car numbers). Before you reset the scanner, try turning it off and on to see if it begins working properly. Reset the scanner only when you are sure it is not working properly.

1.Turn off the scanner.

2.While you hold down the 2 and 9 keys, turn on the scanner.

If you still have problems after resetting the scanner, take it to your lo- cal RadioShack store.

49

Page 49
Image 49
Radio Shack Race Scanner owner manual Resetting the Scanner, BATT.Lo