![](/images/new-backgrounds/1205733/20573333x1.webp)
UNDERSTANDING YOUR SCANNER
Once you understand a few simple terms we use in this manual and familiarize yourself with your scanner’s features, you can put the scanner to work for you. You simply find the communications you want to receive, then set the scanner to scan them.
A frequency is the tuning location of a station (expressed in kHz or MHz). To find active frequencies, you can use the search function.
You can also search the memory banks, which are preset groups of frequencies categorized by type of service.
When you find a frequency, you can store it into a programmable memory location called a channel, which is grouped with your other channels in a memory bank. You can then scan the memory banks to see if there is ac- tivity on the frequencies stored there. Each time the scanner finds an ac- tive frequency, it stays on that channel until the transmission ends.
Remember, you search frequencies and scan channels.
A LOOK AT THE KEYPAD
Your scanner’s keys might seem confusing at first, but this information should help you understand each key’s function.
R ACE M A N PROG BAND S CA N
1
HOLD | D A T A | 1 | 2 | 3 |
PRIORITY L- OU T
H/S | S/S | 4 | 5 | 6 |
|
| |||
| DEL | 7 | 8 | 9 |
|
| |||
| K EYL OC K CLE AR | 9 1- 1 0 0 | W X |
0 E
17