![](/images/new-backgrounds/1205733/20573345x1.webp)
OPERATION
TURNING ON THE SCANNER AND
SETTING SQUELCH
Note: Make sure an antenna is connected to the scanner before you turn it on.
1. Turn SQUELCH fully counterclockwise.
PR
V O L U M E S Q U E L C H
O F F
2.Turn VOLUME clockwise until it clicks and you hear a hissing sound.
P R O - 7 4
V O L U M E S Q U E L C H
OFF
3.Turn SQUELCH clockwise, then leave it set to a point just after the hissing sound stops.
Notes:
•If you have not stored frequencies into any channels, the scanner does not scan.
•If the scanner picks up unwanted, partial, or very weak transmis- sions, turn SQUELCH clockwise to decrease the scanner's sensitiv- ity to these signals. If you want to listen to a weak or distant station, turn SQUELCH counterclockwise.
•If SQUELCH is adjusted so you always hear a hissing sound, the scanner does not scan properly.
23