Panasonic KX-TG2583ALS, KX-TG2583NZS Enter a name, up to 15 characters using, Dialling buttons p

3	Enter a name, up to 15 characters using
	the dialling buttons (p. 44).
	•To move the cursor, press BACK (Ç) or
	FWD/EDIT (É).
	•If a name is not required, press (Å) (Next key)
	and go to step 5.
4	Press (Å) (Next key).
5	Enter a phone number, up to 22 digits.
	•If you misdial, press (INTERCOM/CLEAR).
	Digits are erased from the right. To erase all
	digits, press and hold (INTERCOM/CLEAR).
6	Press (Å) (Next key).
	•If you want to change the storing name or
	number, press (É) (Edit key) repeatedly to
	reach the desired display and change it.
7	Press FWD/EDIT (É) (Save key).
	•A beep sounds.

•To continue storing other items, repeat from step 2.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

Enter name

IH G=Next

Enter name Tom Jones

IH G=Next

Enter phone no.

0398765432

IH G=Next

Tom Jones 0398765432

F=Edit H=Save

Tom Jones 0398765432

Cordless Telephone

•If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phone

number in step 5. This counts as one digit (p. 53).

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•If the display shows “Directory full” in step 2, press (FUNCTION/EXIT/CH). To erase other stored items from the directory, see page 50.

•After the maximum of 50 items has been stored, “Directory full” is also displayed.

•If 3 beeps sound in step 7, the item has not been stored in the directory. Move closer to the base unit and press FWD/EDIT (É) (Save key) again.

For New Zealand Users:

Your telephone service provider may charge you for a local call when it is dialled with an area code prefix. If the charge for local call is unacceptable, only the 7-digits of the local number should be dialled from your telephone. Do not dial the “0” prefix or the area code digit.

43