Panasonic KX-TG2583ALS Storing Caller List Information in the Directory, Edit HSave directory

Storing Caller List Information in the Directory

You can store names and phone numbers that are in the Caller List into the directory. Storing must be carried out with the handset.

Make sure the unit is in the standby mode initially.

1 Press (Å) or (Ä) to enter the Caller List.

2 Press (Å) or (Ä) repeatedly to find the caller you want to store in the directory, and press FWD/EDIT (É) (Yes key).

•If the number requires editing, see page 34.

10 new calls GF H=Directory

0355566677 11:20A JAN.12 ✕3

HEdit

Save directory

GF H=Yes

Cordless

3 Press (Å) or (Ä) to select “Save directory”, and press FWD/EDIT (É) (Yes key).

If there is no name information for the caller, “Enter name” will be displayed.

a)If a name is not required, press (Å) (Next key) and press FWD/EDIT (É)

(Save key).

b)If a name is required, enter the name (p. 44). When finished, press (Å) (Next key) and press FWD/EDIT (É)

(Save key).

•A beep sounds.

•To continue storing other items, repeat from step 2.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

Edit

HSave directory

GF H=Yes

Enter name

IH G=Next

Enter name

CINDY TURNER

IH G=Next

CINDY TURNER 0355566677

Telephone

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•If the display shows “Directory full” in step 3, press (FUNCTION/EXIT/CH) to exit the list. To erase other stored items from the directory, see page 50.

•After the maximum of 50 items has been stored, “Directory full” is also displayed.

•You cannot store caller information in the directory if a phone number is not displayed.

•If 3 beeps sound and the display shows “Save error” in step 3, move closer to the base unit and start again from step 2.

(Continued \)

37