Panasonic KX-TG2583ALS Selecting the recall time, Points to Set recall time, HSet recall time

Press (FUNCTION/EXIT/CH).

Selecting the recall time

The recall time depends on your telephone exchange or host PBX.

You can select the following recall times: “700, 600, 400, 300, 250, 110, 100 or 90 msec (milliseconds)”. KX-TG2583ALB/KX-TG2583ALS comes from the factory set to “100 msec” and KX-TG2583NZS comes set to “600 msec”.

Make sure the unit is in the standby mode initially.

1

2 Press (Å) or (Ä) repeatedly until the arrow points to “Program”, and press FWD/EDIT (É) (Yes key).

HProgram

GF H=Yes

Cordless

3	Press (Å) or (Ä) repeatedly until the arrow	Save DIRECT#
	points to “Set recall time”, and	HSet recall time
	press FWD/EDIT (É) (Yes key).	GF	H=Yes
4	Press (Å) or (Ä) repeatedly until the desired time is displayed, and
	press FWD/EDIT (É) (Save key).

•A beep sounds.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•Users in Australia can access Telstra’s “EASY CALL” service by having the recall time set at 100 msec (this is the factory default setting), and then follow Telstra’s “EASY CALL” instructions to operate this service.

•If you are connected via a PBX, a longer or shorter recall time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX supplier for the correct setting.

For Call Waiting Service Users in New Zealand

Make sure the recall time is set to 600 msec for use with Telecom’s Call Waiting Service. Press (RECALL/PLAYBACK) or (RECALL) if you hear a call-waiting tone while talking.

•The first call is put on hold and you can answer the second call.

•To return to the first caller, press (RECALL/PLAYBACK) or (RECALL) again.

•Your telephone company may not support the second caller display feature.

Telephone

55