Manuals / Panasonic / Communications / Telephone

Panasonic KX-TG2650N Recharge, Battery information, Operation Approx. battery life

Models: KX-TG2650N

1 68

Download 68 pages 36.96 Kb

Page 12

Recharge battery

Settings

Recharge

Recharge the battery when:

—“Recharge battery” is displayed on the handset,

—“ ” ﬂashes on the display, or

—the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 15 minutes, the

display will keep indicating “Recharge battery” and/or “ ” will continue to ﬂash.

Battery information

After your Panasonic battery is fully charged (p. 11):

	Operation		Approx. battery life

While in use		near the base unit*	Up to 4.5 hours
While in use
(TALK)		away from the base unit	Up to 3.5 hours

While not in use (Standby)			Up to 14 days

*Within about 10 feet (3 m)

•Battery life may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient temperature.

•Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the base

unit until “Recharge battery” is displayed and/or “ ” ﬂashes. This will maximize the battery life.

•The battery cannot be overcharged.

12

Image 12

Panasonic KX-TG2650N operating instructions Recharge, Battery information, After your Panasonic battery is fully charged p

Contents

Charge the battery for about 8 hours before initial use Operating InstructionsBefore Initial Use Attach your purchase receipt here For your future referenceSerial No Date of purchase One Wall Mounting Adaptor p Belt Clip pBattery Charge For Best PerformanceBase Unit Location/Noise Contents Useful Information Fashion PlateTM Snap-On Color Covers OptionalButton and Indicator p , 25 Location of ControlsBase unit Antennas pClear Button p Caller ID Indicaor p Tone Button pHow to handle the handset antenna HandsetStandby mode DisplaysBacklight LCD Displays # 0 new callSettings ConnectionsBattery strength Display prompt Battery strengthHigh Medium Low ﬂashing Needs to be recharged Battery information After your Panasonic battery is fully charged pOperation Approx. battery life RechargeSelecting the Dialing Mode Make sure the unit is in the standby mode initiallySelecting the Line Mode Points to Set line modeHSet line mode Talk switching Line mode GF H=SaveProgrammable Functions During programmingSetting the Auto Talk Feature Points to Talk switchingSet line mode HTalk switching Press Ö or Ñ to select On or OffSelecting the Ringer Volume Handset ringer volumeBase unit ringer volume To turn the ringer ON, press Ñ or ÖMaking Calls With the HandsetPress Dial a phone number To hang up, press OFF or placeHands-free Digital Duplex Speakerphone If noise interferes with the conversation To redial the last number dialed on the handsetTo dial after conﬁrming the entered number To redial after conﬁrming the last number dialedWhen the other party answers With the Base Unit Digital Duplex SpeakerphoneDial a telephone number Talk into the MIC microphoneTo adjust the speaker volume 8 levels while talking To redial the last number dialed on the base unitTo put a call on hold To release the holdSimultaneous Keypad Dialing Useful informationAnswering Calls Auto TalkIf the handset is off the base unit Press Handset off the base unit without PressingWith the Base Unit Talk into the MICTo hang up, press Caller ID Service How caller information is displayed when a call is receivedCall group feature Dual-Color Visual Ringer To check the number of new calls Handset displayBase unit display While the handset is off the base unitUsing the Caller List Viewing the Caller ListWith the handset With the base unitCalling Back from the Caller List What √ meansIf a caller calls more than once With the handset With the base unitEditing the Caller’s Phone Number HEdit Save directory=Next H=Edit 321-5555 Press Ö or Ñ to enter the Caller Fred ParkerStoring Caller List Information in the Directory Press Ö or Ñ to select Save directory, and press á Yes keyEdit HSave directory Enter name IH G=NextErasing Caller List Information To erase a speciﬁc caller from the Caller ListTo erase all entries in the Caller List With the handset/base unitOne-Touch Dialer Storing a Phone Number in the Direct ButtonUsing the Directory Dialing the Stored Number in the Direct ButtonStoring Names and Numbers in the Directory While the arrow points to Save directory, press á Yes keyDirectory= 20 items Press Ö Next key Enter a phone number, up to 22 digitsIf not required, select Off Set group IH G=NextTom Jones =Edit H=Save Selecting Characters to Enter Names If you make a mistake while entering a nameNumber of times key is pressed Keys For example, to enter Tom Jones Eight timesFinding Items in the Directory With the handset/base unitTo search for a name by initial Dialing from the Directory Index tableKeys Index Editing an Item in the Directory Add a number to the current numberSet group Off IH G=Next Erasing an Item from the Directory Intercom Paging the base unit from the handsetPaging the handset from the base unit Handset locator Base unit Talk into the MIC HandsetTransferring a Call Using the Intercom From the handset to the base unitFrom the base unit to the handset During an intercom callVoice Mail Service Storing a Voice Mail Access NumberEnter your access number, up to 32 digits Points to Save mailbox#Setting the Voice Mail Tone To erase a stored numberPress and hold CLEAR/INTERCOM in on Press Ö or Ñ to select Off or OnListening to Voice Mail Messages Follow the pre-recorded instructionsSpecial Features Automatic Security Code SettingHow to Use the Pause Button For Analog PBX Line/Long Distance Service UsersFor Call Waiting Service Users Call Waiting Caller ID FeatureFor Rotary or Pulse Service Users Temporary Tone DialingFlash Button Selecting the ﬂash timeWall Mounting Using the Belt Clip To charge the handset batteryTo attach the belt clip To remove the belt clip Place the handset on the cradleUsing an optional Headset Connecting the headset to the handsetConnecting the headset to the base unit To switch to the speakerphone while using the headsetTo adjust the headset receiver volume High, Medium or Low While using the headset, press Ñ or ÖAdding Another Phone Making/Answering callsFashion PlateTM Snap-On Color Covers Optional Unlock the other tab by pressing horizontally # and vertically $, and partially pull downColor cover % in the same way. Remove Completely the cover from the handsetBattery Replacement Error Messages Handset displayBase unit display ProblemRemedy Before Requesting HelpDIGITAL!SP-PHONE. Start again from Problem Remedy Access numbers entered after pressingDigits long, the number will not be Redialed correctlyOnly Important Safety Instructions Useful Information FCC and Other Information Ringer Equivalence No. RENUseful Information For product service When you ship the product