Panasonic KX-TG2650N operating instructions Programmable Functions, During programming

Programmable Functions

You can program the following function items using the handset near the base unit. The display shows the programming instructions. See the corresponding pages for function details.

Make sure the unit is in the standby mode initially.

Press (FUNCTION/CH).

<Function menu>*
HSave directory		To store an item in the directory (p. 36).
Ringer volume		To select the ringer volume (p. 17).
Program
	Press á.
<Function menu>*
HSave DIRECT#		To store a phone number in the DIRECT button
		(p. 34).
Set flash time		To select the flash time (p. 51).
Save mailbox#		To store a voice mail access number (p. 46).
Voicemail tone		To set the voice mail tone (p. 47).
Set line mode		To select the line mode (p. 14).
Talk switching		To set the auto talk feature (p. 16).
Set dial mode		To select the dial mode (p. 13).

Preparation

During programming:

*To select a desired function item, press Ö or Ñ repeatedly until the arrow points to the item. Then press á to go to the next step.

•You can exit the programming mode any time by pressing (OFF).

•If you do not press any buttons for 60 seconds, the unit will return to the standby mode.

•If the handset has lost communication with the base unit, 3 beeps sound and “No link to base. Place on cradle and try again.” is displayed.

15