25
Chapter 2 Basic Operation
To dial after confirming theentered number
1
Enter a phone number.
•If you misdial, press (CLEAR).
Digits are erased from the right.
•To cancel, press (EXIT).
2
Lift the handset or press
(DIGITAL!SP-PHONE).
•The line number is displayed.
•After a few seconds, the display
will show the length of the call.
•You can press a line button
instead of (DIGITAL!SP-PHONE).
3
When the other party answers,
talk into the handset or MIC.
4
To hang up, replace the handset
or press (DIGITAL!SP-PHONE).
To adjust the handset volume
(High, Medium or Low) or the
speaker volume (8 levels)
To redial using the redial list
The last 10 phone numbers dialed
with the base unit are stored in the
redial list.
1. Press (REDIAL).
•The last number dialed is
displayed.
2. Press (REDIAL) until the desired
number is displayed.
•You can scroll between numbers by
pressing or .
•To exit the list, press (EXIT).
3. Lift the handset or press
(DIGITAL!SP-PHONE).
•To erase an item, repeat steps 1 and
2, and press (CLEAR).
•If “No items stored” is displayed,
the list is empty.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
•Talk alternately with the caller in a quiet room.
•If the other party has difficulty hearing you, press to decrease the speaker
volume.
•If the other party’s voice from the speaker cuts in/out during a conversation,
press to decrease the speaker volume.
•You can switch to the handset by lifting it up. To switch back to the
speakerphone, press (DIGITAL!SP-PHONE).
To redial the last numberdialed
Lift the handset or press
(DIGITAL!SP-PHONE), and press
(REDIAL).
Ex. Handset volume: High
•Each time you press or , the
volume level will change.
1112222
Low ❚❚❚❚❚❚❚ High
Ex. Speakerphone volume: 8
Low❚❚❚❚❚❚❚❚ High
Press or while talking.