81
Chapter 4
Voice Mail System/Automated Attendant System/ Answering System
Pager Call
Base Unit Handset
This feature allows the unit to alert your pager when your mailbox has
received an incoming message from an outside caller. (When a message
has been transferred or delivered from another user, the unit will not alert
your pager.) You can retrieve the message from a touch tone telephone
(p. 78). If you subscribe to a Caller ID service, the caller’s telephone
number will be displayed on your pager. First store a pager number and
the pager display number with the base unit or each cordless handset
(p. 81, 82), then set the unit to call the pager. Programming must be
carried out separately for the base unit and cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.

Storing a Pager Number

1
Press (FUNCTION).
2
Press or until the arrow
points to “Pager setting”,
and press H.
3
While “Pager number” is at the
arrow, press H.
•If the number has already been
stored, it will be displayed .
4
Enter your pager number, and
press (PAUSE) twice.* Enter the
access code, if required by your
pager company, and press
(PAUSE) twice again.*
OR
If you use a 1-800 pager
number with a pager PIN
code:
Enter the 1-800 number, and
press (PAUSE) 3 times.*
Enter the pager PIN code, and
press (PAUSE) twice.*
•If you misdial, press (CLEAR).
Digits are erased from the right. To
erase all the digits, press and hold
(CLEAR).
•You can enter a total of 44 digits.
Enter pager No.:
*Pager companies require a delay
after the pager number and/or the
access code is dialed.
For a 1-800 pager number, a delay
will be required after the pager
number and the pager PIN code are
dialed.
Contact your pager company
regarding the required pause time.
Pressing (PAUSE)once creates a
3.5 second delay and counts as one
digit.
•If the line(s) has(have) rotary or pulse
service, press (*)between the pager
number and (PAUSE) in step 4.
•If you stored a 1-800 pager number,
alphanumeric voice dispatch pager
services will not work with this
function.
5
Press (ENTER).
•A beep sounds.
•To return to the standby mode,
press (EXIT).