68
For Caller ID service users (p. 38)
During playback, the display shows the
name and/or number of the caller whose
message is being played.
To call back the displayed number:
During playback, lift the handset or press (DIGITAL!SP-PHONE).
•You can press a line button instead of pressing (DIGITAL!SP-PHONE).
•The unit stops playback and automatically dials the displayed phone number.
JACK SMITH
1-234-567-8901
---Message 3---

During playback

To repeat a
message
To skip a message
To stop operation
Press (1) or I. (If you press within 5 seconds of
playback, the previous message will be played.)
Press (2) or H. (The next message is played.)
Press (STOP).
•To resume playback, press (STOP).
•If you do not press any button for 60 seconds, the
unit will return to the standby mode.
To adjust the speaker volume (8 levels):
Press or during playback.
•Each time you press or , the volume
level will change.

Flash Memory Message Backup

Messages are stored indefinitely on a “flash memory” IC chip and will
not be affected by power failures. All messages are saved until you
erase them.
Ex. Level 8
Loud
Low❚❚❚❚❚❚❚❚ High
Command Menu:
If you do not press in step 3 on page 67, after listening to new
messages or all messages, the Command Menu will be announced and
displayed:
“To play all messages, press 1.
To deliver a message, press 2. (p. 73)”
1=Play all msg.
2=Deliver msg.
=End
Listening to Messages with the Base Unit