![](/images/backgrounds/260762/bg4a.png)
Troubleshooting
74
GeneralProblem Cause & Remedy
The unit does not work. •Check the settings (p. 11–13).
•Check whether the dialing mode setting is
correct (p. 18).
•Charge the battery fully (p. 12).
•Clean the charge contacts and charge again
(p. 13).
•Install the battery properly (p. 12).
•Unplug the base unit’s AC adaptor to reset it.
Plug in, and try again.
•The handset has not been registered to the
base unit. Register the handset (p. 67, steps
5 and 6).
•Re-install the battery (p. 12) and charge it
fully.
“Recharge battery” is
displayed, “” flashes
or the handset beeps
intermittently.
•Charge the battery fully (p. 12).
“Charge for 6 HRS” and
“” are displayed and the
handset does not work.
•The battery has been discharged. Charge the
battery fully (p. 13).
You charged the battery fully,
but “Recharge battery” is
still displayed and/or “”
continues to flash, or “Charge
for 6 HRS” and “” are
displayed.
•Clean the charge contacts and charge again
(p. 13)
.
•Install a new battery
(p. 12, 13)
.
The CHARGE indicator does
not go out after the battery
has been charged.
•This is normal.
If you cannot solve your
problem
•Call our customer call center at
1-800-211-PANA(7262).
•Panasonic’s e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY