Programmable Settings
18
Dialing Mode (use either or )
If you have touch tone service, set to Tone. If rotary or pulse service is used, set
dialing mode to Pulse. The factory preset is Tone.
: Press [CONF/FUNCTION], and follow steps 2 to 5 above, using
the handset. Press the soft key (
), then press [OFF].
Line Mode (use either or )
The line mode is preset at the factory to B. Generally leave the line mode to B. If
a change of the line mode setting is required by our customer call center or
serviceman, change the line mode to A.
: Press [CONF/FUNCTION], and follow steps 2 to 5 above, using
the handset. Press the soft key (
), then press [OFF].
1Press [FUNCTION/EDIT].
2Scroll to Initial setting by pressing
[] or [], then press
[]
.
3Scroll to Set tel line by pressing [] or
[], then press
[]
.
4Press
[]
at Set dial mode.
5Select Pulse or Tone by pressing [] or
[].
6Press [] (Save), then press [STOP].
1Press [FUNCTION/EDIT].
2Scroll to Initial setting by pressing
[] or [], then press
[]
.
3Scroll to Set tel line by pressing [] or
[], then press
[]
.
4Scroll to Set line mode by pressing []
or [], then press
[]
.
5Select A or B by pressing [] or [].
6Press [] (Save), then press [STOP].
Base Unit
Handset
Base Unit
Initial setting
Set tel line
Set dial mode
Set dial mode
:Tone
Handset
SA VE
Base Unit
Handset
Base Unit
Initial setting
Set tel line
Set line mode
Set line mode
:B
Handset
SA VE