17
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)

Date and Time

When entering the time, you cannot enter numbers greater than 12. Do not use
military time. (To set 13:00 hours, enter 0100, and select PM.)
1Press [FUNCTION/EDIT].
2Scroll to Date and time by pressing []
or [], then press [].
3(1) Enter 2 digits each for month, day and
year. (Ex. To set Apr. 7, 2003, enter
04 07 03.)
(2) Enter 4 digits for time (hour and minute).
(Ex. To set 9:30, enter 0930.)
If you enter a wrong number, press [] or [] to
move the cursor to the incorrect number. Enter
the correct number.
4Select AM or PM by pressing [].
5Press [] (Save).
If 3 beeps sound, the setting is not correct. Start again from step 3.
The clock starts working.
6Press [STOP].
If a power failure occurs, the time setting may be incorrect. When “” ashes
on the base unit display, adjust the date/time.
For Caller ID service users (p. 29)
Caller ID information will reset the clock after the rst ring if the adjusted time is
incorrect.
If the time has not previously been set, the Caller ID information will not adjust
the clock.
Caller ID information will automatically adjust the clock for daylight saving time.
Base Unit
Date and time
Date:12.31.2003
Time:12:00 AM
0-9=Date&Time
=AM/PM
=Save
1
Date:04.07.2003
Time:09:30 AM
0-9=Date&Time
=AM/PM
=Save
AM