Preparation
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is "Tone". "Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1 [MENU] _ [0][5][1]
2 [,]/[A]: Select the desired setting.
3 [Save] _ [OFF]
Date and time
Set the correct date and time.
-To use the available alarm function (page 29).
-When you play back a message from the answering system (page 31), the unit announces the day and time it was recorded.
1 [MENU] _ [4][1]
2Enter the current month, day, and year by selecting 2 digits for each. Example: August !5, 2007
[0][8] [1][5] [0][7]
3Enter the current hour and minute
(!
Example: 9:30 [0][9] [3][0]
4[AM/PM]: Select "AM" or "PM".
5[Save] _ [OFF]
Note:
•If you make a mistake when entering the date and time, press [4], [_], [A], or [v] to move the cursor, then make the correction.
•The date and time may be incorrect after a power failure. In this case, set the date and time again.
14For assistance, please visit http://www.panasonic.com!hetp
