Answering System
Answering system
This unit contains an answering system which can answer and record calls for
you when you are unavailable to answer the phone.
Important:
•Only 1 person can access the answering system at a time.
•When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been correctly set (page 14).
Memory capacity
The total recording capacity (including your greeting message and voice memo) is about 18 minutes.
A maximum of 64 messages can be recorded.
•If the message memory becomes full, the ANSWER ON indicator flashes
rapidly (if the answering system is turned on). Erase unnecessary messages (page 31).
•When the message memory
becomes full, the greeting message is different depending on your situation:
-If you use the prerecorded greeting message, the unit automatically switches to another prerecorded greeting message asking callers to call again later.
-If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded.
Turning the answering
system on/off
Press IANSWER ON ] to turn on/off the answering system.
•When the answering system is turned on, the ANSWER ON indicator lights.
•When the answering system is turned off, the ANSWER ON indicator turns off.
Screening calls
While a caller is leaving a message, you can listen to the call through the base unit'sspeaker. To adjust the speaker volume, press IA] or Iv] repeatedly. You can answer the call by pressing
Turning off the call screening feature When the base unit is not in use, press [GREETING CHECK], then press and hold IV] until the base unit beeps.
OR
While screening a call, press and hold
[V]until the sound goes off.
Note:
•If you adjust the speaker volume while listening to messages or communicating through the base unit, the speaker volume for call screening is turned on again.
30For assistance, please visit http://www.panasonic.com!hetp
