To establish a conference call:
Press [Conf].
•To leave the conference, press [OFF]. The other parties can continue the conversation.
•To put the outside call on hold, press [HOLD]. To resume the conference, press [Conf].
1During an outside call, press
[LOCATOR/INTERCOM] to put the call on hold.
2To page a specific handset, enter its extension number ([11 - [41).
To page all handsets, press [0] or wait for a few seconds.
3Wait for the paged party to answer.
•If the paged party does not answer,
press [LOCATOR/INTERCOM] to return to the outside call.
4To complete the transfer: Press
•The outside call is being routed to the handset.
To establish a conference call: Press [CONF].
•To leave the conference, press
•To put the outside call on hold, press [HOLD]. To resume the conference, press [CONF].
Answering transferred calls
Press ["_] to answer the page.
Press
Note for handset and base unit:
•After the paging party disconnects, you can talk to the outside caller.
Registering a handset
The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.
1Handset:
[MENU] _ [0][0][1]
2Base unit:
Press and hold [LOCATOR/
INTERCOM] until the IN USE indicator flashes.
•After the IN USE indicator starts flashing, the rest of the procedure
must be completed within 1 minute.
3Handset:
Press [OK], then wait until a beep sounds.
4[OFF]
Registering an additional handset
See page 5 for information on the available model.
Start from step 2.
Deregistering a handset
1 [MENU] _ [0][0][2]
2 [3][3][5] _ [OK]
3Select the handset you want to cancel by pressing the desired handset number ([11 - [41).
For assistance, please visit http://www.panasonic.com!hetp | 39 |
