Panasonic KX-TG6074 Setting up the base unit, Setting up the handset, Connecting the AC adaptor

Setting up the base unit

Connecting the AC adaptor and telephone line cord

Connect the telephone line cord until it clicks into the base unit and telephone line jack (O). Connect the AC adaptor cord (I_) by pressing the plug firmly

(O).

•Use only the included Panasonic AC adaptor PQLV203.

To single-line telephone

O jack (RJ11C)

(120 V AC, 60 Hz)

Note:

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

•The AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the

adaptor may cause it to become disconnected.

•The unit will not work during a power failure. We recommend connecting a corded telephone to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 5).

Preparation

If you subscribe to a DSL service

Please attach a noise filter (contact your

DSL provider) to the telephone line between the base unit and the

telephone line jack in the event of the following:

-Noise is heard during conversations.

-Caller ID features do not function properly.

le-line

elephone jack (RJ1 lC)

Noise filter

Setting up the handset

Connecting the AC adaptor

Available model:

KX-TG6072/KX-TG6073/KX-TG6074

•Use only the included Panasonic AC adaptor PQLV208.

(1_20V AC, 60 Hz)

=

Bottom of the charger

Fasten the AC adaptor cord to prevent it from being disconnected.

For assistance, please visit http://www.panasonic.com!hetp 9