Listening to Voice Mail
messages
The unit lets you know that you have new Voice Mail messages in the following ways:
--"New Voice Mail" is displayed on
the handset.
-The message indicator on the handset flashes slowly if message alert feature is turned on (page 37).
1Press [_'_], then press [VM] within 15 seconds.
OR
[MENU] _[v]/[*]: "V.M.
access"
• The speakerphene turns on.
2 Follow the prerecorded instructions.
3 When finished, press [OFF].
Note:
•If [VM] is not displayed, the Voice Mail access number has not been
stored. Store the number (page 36).
•If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding [OFF] until the handset beeps.
•If your Voice Mail service uses Voice Mail tones and the message is over 3 minutes long, the handset may not indicate new messages.
•If your Voice Mail service uses Voice Mail tones, the tones are heard from any phone connected to the same line. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually.
Voice Mail Service
Message alert
You can select whether or not the message indicator on the handset flashes slowly when there are new recorded messages in the Voice Mail system.
The default setting is "off".
Important:
•If there are new answering system messages present (page 30), the message indicator also flashes slowly.
1 [MENU] _ [0][/_]
2 [,]/[A]: Select the desired setting.
3 [Save] _ [OFF]
Note:
•While message alert is on, battery operating time is shortened (page 11).
For assistance, please visit http://www.panasonic.com!hetp | 37 |
