Getting Started
Initial settings
Symbol meaning:
Example: {V}/{^}: “Off”
Press {V} or {^} to select the words in quotations.
Display language
Important:
L When the language selection is displayed after installing the batteries for the first time, perform step 2.
18i {#}{1}{1}{0}
2{V}/{^}: Select your desired language. i Mi {ic}
Date and time
18i {#}{1}{0}{1}
2Enter the current date, month, and year. i M
Example: 15 July, 2010
{1}{5} {0}{7} {1}{0}
3Enter the current hour and minute. Example: 9:30
{0}{9} {3}{0}
L You can select
4Mi {ic}
Note:
LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.
L The date and time may be incorrect after a power failure. In this case, set the date and time again.
One touch eco mode
The {ECO/R} button on the handset enables you to activate the eco function with one touch.
By activating eco mode, your unit can reduce the base unit transmission power by up to 90% in standby mode.
You can turn on/off one touch eco mode by just pressing {ECO/R}. The default setting is “Normal”.
–When the one touch eco mode is on: “Low” is temporarily displayed and iis shown on the handset display instead of w.
–When the one touch eco mode is off: “Normal” is temporarily displayed and igoes off from the handset display.
Note:
LWhen there is another cordless phone nearby and it is in use, the base unit transmission power may not be reduced.
L Activating one touch eco mode reduces the range of the base unit in standby mode.
L If you set the repeater mode to “On” (page 29):
–One touch eco mode is cancelled.
–“Eco Setup” is not shown in the display menu (page 23).
16Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
