storing frequencies found during chain search into channel memory
You can store frequencies you find in chain search mode or chain search hold mode.
Press FUNC and PGM in chain search mode or chain search hold mode. The lowest blank chan- nel and bank appear.
Press E to store the frequency into the blank channel. To select another channel, press FUNC
+
or 
before you press E. You can also press
If you try to save a frequency that is already stored, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the fre- quency by mistake, press ./CLR. To enter the fre- quency anyway, press E to accept.
The scanner sets itself to program mode after you store a frequency.
program band select mode
You can use this mode to define the search range used during a chain search in each search bank. To set the scanner to program band select mode, press FUNC and B.SLCT. SEARCH appears. Then select a search bank.
41 | Beyond the Basics |
