At least one search bank must be enabled. (The scanner sounds an error tone if you try to disable all the search banks). The search bank and the fre- quency where chain search starts depends on how the scanner was set before you selected chain search mode.
chain search hold mode
To start chain search hold mode, press HOLD in chain search mode. The scanner stops searching and HOLD appears. In this mode, pressing FUNC
and 
changes the search direction downward and pressing FUNC + 
changes the search direction
upward. 
or 
appears according to the current search direction.
paging system eliminator
(information being developed)
Beyond the Basics | 40 |
