•When you enter a frequency into a channel, the scanner automatically turns on the delay function and DLY appears. When delay is turned on, the scanner automatically pauses scanning 2 seconds after the end of a transmis- sion before scanning proceeds to the next channel. To turn the function off or on, press FUNC + DLY.
•If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press ./CLR then enter the correct fre- quency. To enter the frequency anyway, press E to accept.
To program the next channel in sequence, press FUNC + PGM and repeat Steps 2 and 3.
To program the scanner with your local Skywarn frequency, use the supplied frequency guide to find the frequency for your area, and then repeat Steps
27 | Beyond the Basics |
