Enter the frequency you want to start from by using the number keys. (Press ./CLR to enter a decimal point).
Press FUNC and 
or 
. The scanner searches, starting from the frequency you entered in Step 2.
If you enter a frequency that is out of range, the scanner sounds an error tone and Error appears.
Press FUNC + 
to change the search direction
downward or FUNC + 
to change the search direction upward. Frequencies appear during the search.
Notes:
•You can set the delay function on or off during the search or while the search stops.
•You can skip a frequency when the search stops. After the search skip frequency is set, the scan- ner starts direct search again.
direct entry search hold mode
To stop searching during direct entry search, press HOLD. HOLD appears. In this mode, pressing FUNC
+
changes the search direction downward and pressing FUNC + 
changes the search direction
43 | Beyond the Basics |
