Programming
27
For assistance, please visit http://www.panasonic.com/help
For the answering system (KX-TG6521/KX-TG6531/KX-TG6541 series: page 3)
*1If “System” column is checked, you do not need to program the same item using
another handset.
*2This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select Caller ID auto. To turn this feature off, select
Manual. (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*3When the ringer volum e is turned off, ~ is displayed and the handset does not ring
for outside calls. However even when the ringer volume is set to off, the handset
still rings for alarm (page 29), intercom calls, and paging (page 45).
*4If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.
*5If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*6The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*7Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
Feature Code Setting System*1 Page
Play new msg.
(msg.: message)
{3}{2}{3}––38
Play all msg. {3}{2}{4}––38
Erase all msg. {3}{2}{5}r39
Record
greeting {3}{0}{2}r37
Check greeting {3}{0}{3}––37
Pre-recorded
(Reset to pre-
recorded greeting)
{3}{0}{4}r37
Ring count {2}{1}{1}27 rings <4 rings>
Toll saver r41
Recording time {3}{0}{5}1 min <3 min>
Greeting only r41
Remote code {3}{0}{6}<111>r39
Screen call {3}{1}{0}<On> Off –36
Answer on {3}{2}{7}r36
Answer off {3}{2}{8}r36
Voice prompt
(Change language)
{1}{1}{2}{1}: <English>
{2}: Español r14
TG6511(e).book Page 27 Wednesday, April 28, 2010 4:35 PM