Programming
Block calls without phone number
You can reject a call without phone number including “Out of area”, “Private caller”, or “Long distance”.
1{MENU} i{#}{2}{4}{0}
2{V}/{^}: Select the desired setting. i{SAVE} i{OFF}
Viewing/editing/erasing call block numbers
1{MENU} i{#}{2}{1}{7}
2{V}/{^}: Select the desired entry. L To exit, press {OFF}.
3To edit a number:
{EDIT} iEdit the phone number.
i{SAVE} i{OFF}
To erase a number:
{ERASE} i{V}/{^}: “Yes” i
{SELECT} i{OFF}
Note:
L When editing, press the desired dial key to add, {CLEAR} to erase.
L When viewing, “Block w/o num” is displayed if the block calls without phone number feature is turned on. To turn the feature off: {ERASE} i{V}
i{SAVE} i{OFF}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
L See page 6 for information on the available model.
Registering a handset to the base unit
The supplied handset and base unit are
1Handset:
{MENU} i{#}{1}{3}{0}
2Base unit:
■
■
L If all registered handsets start ringing, press the same button to stop. Then repeat this step.
L The next step must be completed within 90 seconds.
3Handset:
Press {OK}, then wait until a long beep sounds.
Note:
L While registering, “Base in registering” is displayed on all registered handsets.
L When you purchase an additional handset, refer to the additional handset’s installation manual for registration.
For assistance, please visit http://www.panasonic.com/help | 31 |
