Useful Information
47
For assistance, please visit http://www.panasonic.com/help
Wall mounting
The base unit can be mounted on a wall
by revolving the bracket to “WALL”
position (default: “DESK” stand
position).
Note:
LMake sure that the wall is strong
enough to support the weight of the
unit.

Base unit

1Turn the bracket 180 degrees
counterclockwise in the “WALL”
direction until a click is heard.
LThe bracket cannot be removed.
Do not turn the bracket more than
180 degrees.
2Tuck in the telephone line cord (A).
Connect the AC adaptor cord and
telephone line cord (B).
3Mount the unit on a wall then slide
down to secure in place.
To stand on a desk
Turn the bracket 180 degrees clockwise
from the “WALL” position to the “DESK”
direction until a click is heard.

Charger

Drive the screws (not supplied) into the
wall.
Bottom
A
B
Hook
83 mm
(31/4 inches)
or
102 mm
(4 inches)
83 mm
(
31/4 inches
)
Wall phone plate
102 mm
(4 inches)
(120 V AC, 60 Hz)
1
2
1
2
Bottom
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
TG6511(e).book Page 47 Wednesday, April 28, 2010 4:35 PM