Answering System
*1 If pressed within the first 5 seconds of a message, the previous message is played.
*2 To resume playback:
{V}/{^}: “Playback” i{SELECT}
*3 You can also erase as follows: {ERASE} i{V}/{^}: “Yes” i {SELECT}
Calling back (Caller ID subscribers only)
If caller information is received for the call, you can call the caller back while listening to a message.
1Press {PAUSE} during playback.
2{V}/{^}: “Call back” i
{SELECT}
Editing the number before calling back
1Press {PAUSE} during playback.
2{V}/{^}: “Edit & Call” i
{SELECT}
3Press {EDIT} repeatedly until the phone number is shown in the desired format (page 34). i{C}
Erasing all messages
1{MENU} i{#}{3}{2}{5}
2{V}/{^}: “Yes” i{SELECT} i
{OFF}
Voice memo
Available for:
Recording a voice memo
You can use the base unit to leave a voice memo (voice message) for
yourself or someone else (3 minutes max.). Voice memos can be played back later with the same operation used to play back answering system messages.
1{MEMO}
2After the unit beeps, speak clearly about 20 cm (8 inches) away from the microphone.
3To stop recording, press {■} (STOP).
Remote operation
Using a
Remote access code
A
Important:
L To prevent unauthorized access to this product, we recommend that you regularly change the remote code.
1{MENU} i{#}{3}{0}{6}
2Enter the desired
3{SAVE} i{OFF}
Deactivating remote operation
Press {*} in step 2 on “Remote access code”, page 39.
L The entered remote access code is deleted.
For assistance, please visit http://www.panasonic.com/help | 39 |
