Registering a handset to the base unit
1Handset:
M N
2MbN: “Handset Setup” a M N
3MbN: “Register H.set” a MN
4Base unit:
Press and hold MN for about 5 seconds, until the registration tone sounds.
RIf all registered handsets start ringing, press MN again to stop, then repeat this step.
(KX-TG2722)
RThe next step must be completed within 90 seconds.
5Handset:
Wait until “Enter Base PIN” is displayed. a Enter the base unit PIN (default: “0000”).
a MN
RIf you forget your PIN, contact an authorised service centre.
RWhen the handset has been registered successfully, stops flashing.
Deregistering a handset
1MN
2MbN: “Base Unit Setup” a MN
3335 a MN
RAll handsets registered to the base unit are displayed.
4Enter the desired handset number you want to cancel. a M N
5MbN: “Yes” a MN
RA confirmation tone sounds.
RThe handset does not beep when cancelling its own registration.
6MN
Changing the base unit PIN (Personal Identification Number)
Important:
RIf you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to
you. If you forget your PIN, contact an authorised service centre.
1MN
2MbN: “Base Unit Setup” a MN
3MbN: “Base Unit PIN” a M N
4Enter the current 4-digit base unit PIN (default: “0000”).
5Enter the new 4-digit base unit PIN. a MN a M N
38
Useful Information
TG2721_22AL(en)_0730_ver001.pdf 38TG2721_22AL(en)_0730_ver001.pdf 38 2012/07/30 16:53:062012/07/30 16:53:06