Making cellular calls
Available for:
KX-TG7741 series (page 3)
1Press MCELL 1N or MCELL 2N.
2Dial the phone number.
3When the other party answers, speak into
the microphone.
RSpeak alternately with the other party.
4When you finish talking, press
MSP-PHONEN.
Note:
RFor best performance, use the
speakerphone in a quiet environment.
RWhile on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 29),
press MCELLN on the handset. a MbN:
Select the desired cellular phone. a
MSELECTN a Press MSP-PHONEN on the
base unit.
– When only 1 cellular phone is registered
or the line is set to make cellular calls
(page 20), press MCELLN on the
handset, then press MSP-PHONEN on
the base unit.
If the handset is on the base unit, simply lift
it.

Adjusting the speaker volume

Press MjN or MkN repeatedly while talking.

Redialing the last number dialed

1Press MCELL 1N or MCELL 2N.
2MREDIALN
Making landline calls
1MSP-PHONEN
2Dial the phone number.
3When the other party answers, speak into
the microphone.
4When you finish talking, press
MSP-PHONEN.
Note:
RWhile on a call, you can switch from the
base unit to the handset:
Press MN on the handset, then press
MSP-PHONEN on the base unit with the call
sharing mode on (page 29).
If the handset is on the base unit, simply lift
it.

Redialing the last number dialed

MSP-PHONEN a MREDIALN

Pause (for PBX/long distance service

users)

A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 32).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1MSP-PHONEN
29 a MPAUSEN
3Dial the phone number.
Note:
RA 3.5 second pause is inserted each time
MPAUSEN is pressed.
Answering calls
When a call is being received, the SP-PHONE
indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1Press MSP-PHONEN when the unit rings.
RYou can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2Speak into the microphone.
3When you finish talking, press
MSP-PHONEN.
For assistance, please visit http://www.panasonic.com/help 27

Making/Answering Calls Using the Base Unit