Using a Bluetooth wirelessheadset (optional) forlandline calls
By registering a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R1 headset can be registered to the base
unit. However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.
RFor best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).

Registering a headset to the base

unit

Important:
RMake sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1Your headset:
Set your headset to registration mode.
RRefer to the headset operating
instructions.
2Handset:
MMENUN#621
3Enter your headset PIN.
RTypically, default PIN is “0000”. Refer
to the headset operating instructions.
4Press MOKN, then wait until a long beep
sounds.
5MOFFN
RWhen the HEADSET indicator on the
base unit lights green, you are ready to
use the headset.

Connecting/disconnecting a headset

If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
RMake sure that the headset is turned on.
Base unit*1
*1 KX-TG7741 series: page 3
To connect:
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long beep
sounds.
Handset
1To connect/disconnect:
MMENUN#622
RA long beep sounds.
2MOFFN

Deregistering a headset

You can cancel a registration of the headset
that is stored to the base unit. See
“Deregistering Bluetooth devices”, page 21.

Operating a Bluetooth wireless

headset using a landline

Important:
RRefer to your headset operating instructions
for headset operations.

Answering landline calls with your

headset

To answer a landline call, turn on your
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
Note:
RIf you cannot hang up the call using your
headset;
– press MnN (STOP) on the base unit.
(KX-TG7731 series: page 3)
For assistance, please visit http://www.panasonic.com/help 47
Using Bluetooth Devices