The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each handset
(page 38). The default setting is “On”.
Note:
RPhone numbers from the 4 most recently
edited area codes are automatically edited.
Erasing selected caller
information
1MFN CID
2MbN: Select the desired entry.
3MERASEN a MbN: “Yes”
4MSELECTN a MOFFN
Erasing all caller information
1MFN CID
2MERASEN a MbN: “Yes”
3MSELECTN a MOFFN
Storing caller information to the
phonebook
1MN CID
2MbN: Select the desired entry.
RTo edit the number, press MSELECTN,
then press MEDITN repeatedly until the
phone number is shown in the desired
format.
3MSAVEN
4MbN: “Phonebook” a MSELECTN
5Continue from step 3, “Editing entries”,
page 31.
For assistance, please visit http://www.panasonic.com/help 45
Caller ID Service