2Enter the desired name (max. 10
characters; see the character table,
page 30).
RIf not required, go to step 3.
3MSAVEN
4MbN: Select the desired setting. a
MSELECTN 2 times
5MOFFN
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 41).
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 41).
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list:
– cellular calls are rejected.
– landline calls are disconnected after the
unit first sends out a busy tone to the caller.
Important:
RWhen the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 44) with after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
RWe recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
nFrom the caller list:
1MFN CID
2MbN: Select the entry to be blocked.
RTo edit the number, press
MSELECTN, then press MEDITN
repeatedly until the phone number
is shown in the 10-digit format.
3MSAVEN
4MbN: “Call block” a MSELECTN
5MbN: “Yes” a MSELECTN
6Edit the phone number if necessary
(24 digits max.).
7MSAVEN a MOFFN
nBy entering phone numbers:
1MMENUN#217 a MADDN
2Enter the phone number (24 digits
max.).
RTo erase a digit, press MCLEARN.
3MSAVEN a MOFFN
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing “Out
of area”.
1MMENUN#240
2MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call block
numbers
1MMENUN#217
2MbN: Select the desired entry.
RTo exit, press MOFFN.
3To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Note:
RWhen editing, press the desired dial key to
add, MCLEARN to erase.
RWhen viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
For assistance, please visit http://www.panasonic.com/help 41
Programming