Using Bluetooth devices
Problem Cause/solution
I cannot copy phonebook
entries from a cellular phone.
RConfirm that the cellular phone supports Bluetooth
wireless technology.
RConfirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
RIf the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
RSomeone is using a cellular line or headset. Try again
later.
RTurn the cellular phone off, then turn it on and try again.
RIf an entry is already stored in the unit’s shared
phonebook, the entry cannot be copied even by selecting
another group.
I cannot have a conversation
using the headset.
RYour Bluetooth headset is not registered. Register it
(page 47).
RTurn your headset off, then turn it on and try again.
Noise is heard during a call on
the headset.
RA Bluetooth headset can communicate with the base unit
within a range of approximately 10 m (33 feet). The
connection may be subject to interference from
obstructions such as walls or electronic devices. Move
closer to the base unit.
I cannot connect my headset to
the base unit.
RConfirm that your headset is turned on.
RIf your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
RIf someone is using a cellular line, you cannot connect the
headset. There can be only one active Bluetooth
connection at a time.
RThe headset has not been registered to the base unit.
Register the headset (page 47).
Some headset enhanced
features are not available.
RThe base unit does not support enhanced features such
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
RThe Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
RThe headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
For assistance, please visit http://www.panasonic.com/help 67
Useful Information